It’s important to know how to open from a Garage Door Repair Azle TX manually in case of a power outage or if the garage door opener fails.
Here’s How to do it from a Garage Door Repair Azle TX
Step 1: Disconnect the garage door opener
Before attempting to open the garage door manually, you’ll need to disconnect the garage door opener. Most garage door openers have a release cord or lever that you can pull to disengage the opener from the door. Look for this cord or lever on the opener motor unit or track. Pull it down or towards you to release the door from the opener mechanism.
Step 2: Check the door for balance
Once the garage door is disconnected from the opener, you’ll need to check it for balance. A balanced garage door should be easy to lift and lower manually. If the door is difficult to lift or it slams shut when released, the door springs may be out of balance. This is a safety hazard and should be addressed by a professional garage door repair technician.
Step 3: Locate the emergency release cord
Next, locate the emergency release cord on the garage door. This cord is typically a red handle that hangs from the garage door trolley. The trolley is the part of the garage door that moves along the track. The emergency release cord allows you to disconnect the trolley from the door in case of an emergency.
Step 4: Pull the emergency release cord
Pull the emergency release cord down or towards you to disengage the trolley from the door. You should be able to do this with one hand. If the cord is difficult to pull, make sure that the door is in the fully closed position. You may need to lift the door slightly to release tension on the trolley.
Step 5: Lift the garage door
Once the trolley is disengaged, you can lift the garage door manually. Depending on the weight of the door, this may be a two-person job. Lift the door slowly and carefully, using your legs and not your back. Keep your feet and fingers away from the door tracks and hinges.
Step 6: Secure the garage door
After you have lifted the garage door to the desired height, you’ll need to secure it in place. There should be a locking mechanism on the garage door track that you can use to hold the door in place. Alternatively, you can use C-clamps to secure the door to the track. Make sure that the door is secure before letting go of it.
Step 7: Close the garage door
When it’s time to close the garage door, you’ll need to release the locking mechanism or remove the C-clamps. Slowly lower the door to the ground, using your legs to support the weight of the door. Once the door is fully closed, you can reconnect the garage door opener by pulling the release cord or lever in the opposite direction.
In conclusion, opening a garage door manually is a simple process that can be done in a few minutes. It’s important to disconnect the garage door opener before attempting to open the door manually. Make sure that the door is in balance and that the emergency release cord is accessible. Lift the door slowly and carefully, securing it in place before letting go. If you’re not comfortable opening the garage door manually, or if the door is out of balance, contact a professional garage door repair technician. They can ensure that your garage door is safe and functioning properly.
Garage Door Experts of Azle
525 Commerce St #5, Azle, TX 76020, United States
1-817-518-4880