Tag: garage door repair Azle TX

If you notice that your garage door roller has come off track, it’s important to address the issue as soon as possible.

Here’s a step-by-step guide from Azle Garage Door on repairing a garage door roller off track:

If I notice that my garage door roller has come off track, I would immediately disconnect the power to the garage door opener to prevent any accidents. Then, I would inspect the garage door tracks and rollers to determine the extent of the damage, looking for any bent or broken tracks, damaged rollers, or loose hardware.

Next, I would need to remove the garage door from the track in order to access the roller and track. This can be done by releasing the tension from the torsion spring and manually lifting the door off the track.

Once I have removed the door, I would reset the roller onto the track. This may require removing the roller and repositioning it onto the track or replacing the roller if it is damaged.

If the track is bent, I would use a pair of pliers or a track-bending tool to gently straighten the track. I would be careful not to over-bend the track, as this can cause further damage. If the tracks are misaligned, I would use a level to adjust the position of the track, making sure the track is level and perpendicular to the garage door opening.

After straightening the track and aligning it properly, I would apply lubricant to the tracks to ensure smooth operation of the garage door. Then, I would carefully lift the door back onto the track and reattach any hardware that was removed.

Finally, as per Azle Garage Door, I would test the garage door to ensure it is functioning properly by opening and closing it several times to make sure that it moves smoothly along the track. If I were unsure about any of these steps, or if the damage to my garage door was extensive, I would seek professional help to avoid causing further damage or accidents.

Garage Door Experts of Azle

102 Manor Dr #18, Azle, TX 76020

817-646-8862

I can help you reset your garage door keypad pin number as stated in Azle Garage Door.

The first step we need to take is identifying the type of keypad you have, as different models and brands may have different instructions for resetting the pin number. Once we have identified your keypad, we need to locate the “reset” button, which is typically located on the back of the keypad or inside the battery compartment. We will then need to press and hold the “reset” button for a few seconds, which will erase any existing pin number and allow us to set a new one.

After we have reset the keypad, we can then set a new pin number. Depending on your keypad, this may involve entering a specific sequence of numbers or using up/down arrows to select the desired pin number. We will need to follow the instructions in your keypad’s manual to set your new pin number.

Once we have set your new pin number, we will need to test the keypad to make sure it’s working properly. We will stand outside your garage door and enter the new pin number on the keypad. If the door opens, then the new pin number has been successfully programmed. If the door doesn’t open, we will double-check that we entered the new pin number correctly and try again.

Here are some additional tips to keep in mind when resetting your garage door keypad pin number:

• Make sure to choose a secure pin number that is easy for you to remember but difficult for others to guess. Avoid using simple or common pin numbers like “1234” or your address.
• If you have multiple garage door openers, we may need to reset the pin number for each one separately.
• If you are unsure about any part of this process, we can consult your keypad’s manual or contact a professional for assistance.

By following these steps from Azle Garage Door, we should be able to successfully reset your garage door keypad pin number. Good luck!

Garage Door Experts of Azle

328 W Main St., Azle, TX 76020

817-646-8862

Garage doors are an important component of a home’s exterior, providing not only protection for vehicles and other items stored inside, but also contributing to the overall aesthetic appeal of the property. The cost of garage doors can vary depending on a number of factors, including the type of door, material used, size, style, and any additional features or customizations.

In this article, we will explore the different types of Garage Door Repair Azle TX and their associated costs, in order to provide a comprehensive guide to garage door pricing.

Types of Garage Doors

There are several different types of garage doors, each with their own unique characteristics and price points. The most common types of garage doors include:

1. Sectional Garage Doors – These are the most popular type of garage doors, consisting of panels that slide up and overhead when opened. They are available in a variety of materials, including steel, aluminum, and wood, and can be insulated for added energy efficiency.
2. Roll-up Garage Doors – Roll-up garage doors consist of a single sheet of metal that rolls up and into a box when opened. They are typically used in commercial or industrial settings, but can also be installed in residential garages.
3. Side-hinged Garage Doors – These doors swing open on hinges, similar to traditional entry doors. They are often made of wood and can provide a classic or rustic look to a home’s exterior.
4. Tilt-up Garage Doors – Tilt-up garage doors consist of a single panel that tilts up and into the garage when opened. They are often made of wood and can be customized with windows or other decorative features.

Costs of Garage Doors

The cost of a garage door can vary widely depending on the type, material, size, and features of the door. In general, sectional garage doors are the most affordable option, with prices starting at around $400 for a basic, non-insulated steel door. Insulated sectional garage doors can cost anywhere from $700 to $1,500 or more, depending on the size and material.

Roll-up garage doors are typically more expensive than sectional doors, with prices starting at around $1,000 for a basic, non-insulated door. Insulated roll-up doors can cost upwards of $2,000, depending on the size and material.

Side-hinged garage doors are generally more expensive than sectional or roll-up doors, with prices starting at around $1,500 for a basic, non-insulated wood door. Custom wood doors with decorative features can cost upwards of $4,000 or more.

Tilt-up garage doors are also typically more expensive than sectional or roll-up doors, with prices starting at around $1,000 for a basic, non-insulated wood door. Custom wood doors with windows or other decorative features can cost upwards of $3,000 or more.

Other Factors to Consider

In addition to the type and material of the garage door, there are other factors that can affect the overall cost of the door. These include:

1. Size – Larger doors will typically cost more than smaller doors, as they require more materials and labor to install.
2. Installation – The cost of installation can vary depending on the complexity of the installation and the experience of the installer.
3. Accessories – Additional accessories, such as automatic openers, keyless entry pads, and safety sensors, can add to the overall cost of the door.
4. Customization – Customization options, such as decorative features or unique finishes, can also add to the cost of the door.

Conclusion:

In summary, the cost of a Garage Door Repair Azle TX can vary widely depending on a number of factors, including the type, material, size, and features of the door. While sectional garage doors are typically the most affordable option, custom wood doors with decorative features can cost several thousand dollars or more. Roll-up doors and side-hinged doors are generally more expensive than sectional doors, while tilt-up doors can also be costly. It’s important to consider not only the upfront cost of the door, but also the long-term costs associated with maintenance, energy efficiency, and durability.

Garage Door and Overhead Door Services

817-409-8089

It’s important to know how to open from a Garage Door Repair Azle TX manually in case of a power outage or if the garage door opener fails.

Here’s How to do it from a Garage Door Repair Azle TX

Step 1: Disconnect the garage door opener

Before attempting to open the garage door manually, you’ll need to disconnect the garage door opener. Most garage door openers have a release cord or lever that you can pull to disengage the opener from the door. Look for this cord or lever on the opener motor unit or track. Pull it down or towards you to release the door from the opener mechanism.

Step 2: Check the door for balance

Once the garage door is disconnected from the opener, you’ll need to check it for balance. A balanced garage door should be easy to lift and lower manually. If the door is difficult to lift or it slams shut when released, the door springs may be out of balance. This is a safety hazard and should be addressed by a professional garage door repair technician.

Step 3: Locate the emergency release cord

Next, locate the emergency release cord on the garage door. This cord is typically a red handle that hangs from the garage door trolley. The trolley is the part of the garage door that moves along the track. The emergency release cord allows you to disconnect the trolley from the door in case of an emergency.

Step 4: Pull the emergency release cord

Pull the emergency release cord down or towards you to disengage the trolley from the door. You should be able to do this with one hand. If the cord is difficult to pull, make sure that the door is in the fully closed position. You may need to lift the door slightly to release tension on the trolley.

Step 5: Lift the garage door

Once the trolley is disengaged, you can lift the garage door manually. Depending on the weight of the door, this may be a two-person job. Lift the door slowly and carefully, using your legs and not your back. Keep your feet and fingers away from the door tracks and hinges.

Step 6: Secure the garage door

After you have lifted the garage door to the desired height, you’ll need to secure it in place. There should be a locking mechanism on the garage door track that you can use to hold the door in place. Alternatively, you can use C-clamps to secure the door to the track. Make sure that the door is secure before letting go of it.

Step 7: Close the garage door

When it’s time to close the garage door, you’ll need to release the locking mechanism or remove the C-clamps. Slowly lower the door to the ground, using your legs to support the weight of the door. Once the door is fully closed, you can reconnect the garage door opener by pulling the release cord or lever in the opposite direction.

In conclusion, opening a garage door manually is a simple process that can be done in a few minutes. It’s important to disconnect the garage door opener before attempting to open the door manually. Make sure that the door is in balance and that the emergency release cord is accessible. Lift the door slowly and carefully, securing it in place before letting go. If you’re not comfortable opening the garage door manually, or if the door is out of balance, contact a professional garage door repair technician. They can ensure that your garage door is safe and functioning properly.

Garage Door Experts of Azle

525 Commerce St #5, Azle, TX 76020, United States

1-817-518-4880