A garage door spring plays a crucial role in the smooth operation of your First Call Garage Door of Missouri City. time, these springs may wear out or break, requiring replacement While replacing a garage door spring can be a challenging task, it is doable for a skilled DIYer.

In this comprehensive guide, we will walk you through the process of replacing a garage door spring, step by step, ensuring safety and efficiency throughout the project.

Tools and Materials You Will Need:

Before you start, gather the following tools and materials:

  1. Safety glasses and gloves
  2. Ladder
  3. Wrenches (adjustable and socket)
  4. Vise grips
  5. C-clamps
  6. Tape measure
  7. Winding bars
  8. New garage door springs (make sure to purchase the correct type and size)
  9. Replacement cables (if needed)
  10. Safety cables (if not already installed)
  11. 2×4 wooden blocks
  12. Locking pliers
  13. Helper (recommended)

Safety Precautions:

Safety should be your top priority when working on garage door springs, as they are under high tension. Follow these safety guidelines:

  1. Always wear safety glasses and gloves.
  2. Disconnect the garage door opener from power and remove any locks or ropes.
  3. Keep children and pets away from the work area.
  4. Work with a partner if possible, as some steps require extra hands.
  5. If you’re unsure or uncomfortable, consider hiring a professional technician.

Step 1: Identify the Spring Type:

Garage doors use two types of springs: torsion springs or extension springs. Identify which type your door has before proceeding.

  1. Torsion Springs: These are typically located above the garage door. They wind and unwind to lift and lower the door.
  2. Extension Springs: These are usually found on both sides of the door and stretch to provide tension.

Step 2: Release Tension from the Old Spring:

For safety, you need to release the tension from the old spring before removing it.

  1. If you have torsion springs, use winding bars to unwind them. Insert the bars into the winding cone and slowly release the tension by turning the bars in the opposite direction of the windings.
  2. If you have extension springs, open the garage door completely and clamp locking pliers on the track just below the bottom roller to prevent the door from moving.

Step 3: Remove the Old Springs:

Once the tension is released:

  1. For torsion springs, use a socket wrench to remove the set screws securing the spring to the center bracket. Slide the spring off the tube.
  2. For extension springs, disconnect them from the pulleys and remove them from the brackets.

Step 4: Install the New Springs:

Follow these steps to install the new springs:

  1. For torsion springs, slide the new spring onto the tube and secure it with the set screws.
  2. For extension springs, attach them to the pulleys and brackets.

Step 5: Reapply Tension:

Reapply tension to the new springs:

  1. For torsion springs, use the winding bars to wind the spring in the opposite direction of unwinding until it has the correct tension.
  2. For extension springs, remove the locking pliers, close the garage door, and reattach the safety cables if applicable.

Step 6: Test the Door:

Manually lift and lower the garage door to ensure it operates smoothly and balances correctly.

Step 7: Replace Cables and Safety Cables (if needed):

Inspect the cables for wear or damage. If necessary, replace them, ensuring they are properly secured.

Step 8: Lubricate Moving Parts:

Apply a garage door lubricant to the springs, rollers, and hinges to reduce friction and extend their lifespan.

Step 9: Reconnect the Opener:

Reconnect the garage door opener to power and test it to ensure it operates without issues.

Step 10: Perform a Safety Check:

Test the garage door’s safety features, such as the auto-reverse mechanism, to ensure they are functioning correctly.

Conclusion:

Replacing a garage door spring is a challenging task that requires attention to detail and safety precautions. If you’re not confident in your abilities or are uncomfortable with any part of the process, it’s best to consult a professional technician. However, if you have the necessary skills and follow this step-by-step guide carefully, you can successfully replace your garage door spring and ensure the continued smooth operation of your garage door.First Call Garage Door of Missouri City Always prioritize safety throughout the project to prevent accidents and injuries.

First Call Garage Door of Missouri City

1718 Crescent Oak Dr, Missouri City, TX 77459, United States

1-281-595-8036