Programming a Genie Houston Garage Door Repair opener is a relatively simple process, and it can be done by following a few steps.
In this guide, we will provide you with a step-by-step guide on how to program a Genie garage door opener:
Step 1: Locate the Learn Button The first step is to locate the Learn button on the Genie garage door opener. The Learn button is usually located on the back or the side of the motor unit. It can be identified by its red, orange, or purple color.
Step 2: Press and Release the Learn Button Press and release the Learn button. The light above the Learn button should turn on and remain lit for about 30 seconds. This indicates that the Genie garage door opener is now in programming mode.
Step 3: Press the Button on the Remote Control Next, press the button on the remote control that you want to program to the Genie garage door opener. Hold the remote control about 2-3 feet away from the motor unit.
Step 4: Wait for the Light on the Motor Unit to Blink After pressing the button on the remote control, wait for the light on the motor unit to blink. This indicates that the Genie garage door opener has successfully received the signal from the remote control.
Step 5: Test the Remote Control Test the remote control by pressing the button you just programmed. The garage door should open or close. If the door doesn’t move, try reprogramming the remote control by repeating the previous steps.
Step 6: Program Additional Remotes If you have additional remotes that you want to program, repeat steps 3-5 for each remote control.
Step 7: Clearing Memory To clear the memory of the Genie garage door opener, press and hold the Learn button for about 10 seconds until the light on the motor unit turns off. This will erase all previously programmed remote controls from the opener’s memory.
In conclusion, programming a Genie Houston Garage Door Repair opener is a quick and easy process that requires you to locate the Learn button, press and release it, press the button on the remote control, wait for the light to blink, and test the remote control. If you have multiple remotes, repeat these steps for each one. And if you need to clear the memory of the opener, press and hold the Learn button until the light turns off.
First Call Garage Door Southbelt
12373 Scarsdale Blvd suite c, Houston, TX 77089, United States
1-713-547-5170