Closing a Garage Door Repair Woodland Hills CA manually is an important skill to have in case of a power outage or malfunctioning garage door opener. While it may seem daunting at first, it is actually quite simple to do.
In this article, we will guide you through the steps to manually close a garage door:
Before we begin, it is important to note that manual garage door closing is not recommended unless there is an emergency or a malfunction with the garage door opener. Always follow the manufacturer’s instructions for safe and proper operation of your garage door opener.
Step 1: Release the Garage Door from the Opener
The first step in manually closing a garage door is to release the door from the garage door opener. This is typically done by pulling the release cord, which is located near the garage door opener motor. The release cord should be red in color and easy to spot.
To release the door, simply pull the release cord down and away from the garage door opener motor. This will disengage the door from the opener, allowing you to manually lift and close the door.
Step 2: Check the Balance of the Garage Door
Before attempting to manually close the garage door, it is important to check the balance of the door. A properly balanced garage door should be able to stay open at any point without falling down or rising up.
To check the balance of the door, lift the door manually about halfway up and release it. The door should stay in place and not move up or down on its own. If the door moves up or down, it may be unbalanced and require professional attention.
Step 3: Lift the Garage Door Manually
Once you have released the door from the garage door opener and checked its balance, it is time to manually lift the door. Start by standing in the center of the door, gripping it firmly with both hands. Lift the door straight up, using your legs to help with the lifting motion.
Be sure to keep your fingers and other body parts away from the door’s moving parts, such as the rollers and hinges. These parts can pinch or crush your fingers if they get caught.
Step 4: Close the Garage Door Manually
After lifting the garage door to its fully open position, it is time to close it manually. Start by slowly lowering the door, making sure to keep your fingers and other body parts away from the door’s moving parts. The door should close smoothly and without resistance.
If the door feels heavy or is difficult to close, it may be unbalanced or have a problem with the tracks or rollers. In this case, it is best to stop and call a professional to inspect and repair the door.
Step 5: Re-engage the Garage Door Opener
After manually closing the garage door, it is important to re-engage the door with the garage door opener. To do this, simply lift the door manually about halfway up and release it. This will allow the garage door opener to reconnect with the door and resume its normal operation.
Conclusion:
Manually closing a Garage Door Repair Woodland Hills CA may seem daunting at first, but it is actually quite simple to do. By following the steps outlined in this article, you can safely and efficiently close your garage door manually in the event of a power outage or malfunctioning garage door opener. However, always remember to follow the manufacturer’s instructions for safe and proper operation of your garage door opener, and never attempt to manually close a garage door unless there is an emergency or a malfunction with the garage door opener.
Best Garage Door Repair Experts
5348 Topanga Canyon Blvd, Woodland Hills, CA 91364
818-626-3039