Changing the code on your Chamberlain Garage Door Repair Chandler, AZ opener is a straightforward process that can be done in a few simple steps.
Here’s how you can change the code on your Chamberlain garage door opener:
Step 1: Locate the learn button The first step in changing the code on your Chamberlain garage door opener is to locate the learn button. This button is typically located on the back or side of the opener motor unit, and it may be labeled as “learn” or “program.”
Step 2: Clear the existing code To clear the existing code, press and hold the learn button for about 10 seconds until the indicator light on the motor unit turns off. This will erase any previously programmed codes.
Step 3: Program the new code Once the old code has been cleared, you can program a new code. Press the learn button once to put the opener into programming mode. The indicator light will turn on.
Step 4: Enter the new code Enter your new code on the keypad or remote control. Make sure the code is between four and eight digits long.
Step 5: Test the new code Test the new code by pressing the enter button on the keypad or remote control. The garage door should open or close. If it doesn’t, repeat steps 3 and 4 until you have programmed the new code correctly.
Step 6: Repeat for additional remotes If you have multiple remotes that need to be programmed, repeat steps 3-5 for each remote.
Step 7: Exit programming mode Once you have programmed all the remotes, press the learn button one more time to exit programming mode. The indicator light will turn off.
That’s it! You have successfully changed the code on your Chamberlain Garage Door Repair Chandler, AZ opener. It is important to note that if you experience any issues during this process or if you forget your new code, consult your user manual or contact Chamberlain customer support for assistance.
Acclaim Garage Door of Chandler AZ
184 E Chilton Dr, Chandler, AZ 85225, United States
1-480-545-0538