The garage door’s torsion spring is an important component of the door as it carries all the load during the opening and closing of garage doors. The average person can be confused by garage door springs torsion malfunctions, but fortunately, it is fixable. But, what might be more intriguing is the cause of the problems.

We have conducted a lot of studies to discover reasons for the failure of torsion garage springs and according to Garage Door Repair Rockwall TX, here are the main reasons why:

Inadequate Garage Repair and Maintenance

The inevitable wear and tear to garage doors, but proper maintenance will make the springs of garage doors robust, and aid in determining when it is nearing breaking so that you can avoid the devastating failure of the spring along with the tedious task when it comes to replacing the garage door’s torsion spring.

In addition to spraying the spring with WD-40 every few times throughout the year, you should also check whether the garage door’s balance is at least every quarter. The majority of springs break during winter months and it’s wise to be on guard in these seasons. The signs that indicate the garage door is not balanced are if the door is sagging or falling slightly or if the springs have started to wear.

Needless cost-cutting suggestions

Saving money is a good idea, but occasionally inexpensive becomes really expensive. Torsion springs should ideally be fixed on both ends of a garage door for it to function properly. Other builders and contractors, on the other hand, take their avarice to a whole new level by merely fixing one spring to do the lifting.

This may be effective for lighter and smaller garage doors, but it is advisable to install most doors with two similar torsion springs in order to distribute the load among them. A single torsion spring system cannot handle heavy garage doors. This is because the spring is readily stressed and loses its usefulness over a short period of time, creating an immediate hazard to the surroundings.

Deterioration

Torsion springs for garage doors typically fail due to simple wear and tear. Similar to any other mechanical part, it has a rating that indicates how long it will last. A torsion spring typically has a rating of 10,000 cycles; a cycle is finished once the garage door has been opened and closed successfully. Although the number seems large, the frequency with which garage doors are opened significantly surpasses.

For instance, having two cars that are utilized at various times implies that a day will require roughly 3-6 cycles, and these daily cycles might mount up more fast than you might think. In a busy family, 10,000 cycles might be reached in a single year. If you want a top-rated torsion spring to last longer without needing to be replaced, choose to spend more money.

Rust

Lastly, as stated in Garage Door Repair Rockwall TX, when fixing a garage door opener, look for rust on the torsion spring’s covering. This is due to the fact that rust significantly reduces the torsion springs in garage doors’ lifespan. The corrosive element weakens the entire spring in addition to its frictional effects on the coil. The solution to this issue is routine lubrication to prevent rust.

Rockwall Best Garage & Overhead Doors

Rockwall, Texas 75087

469-423-8082